Fast-Bond Assembly Adhesive 310 ml

Name: Fast-Bond Assembly Adhesive 310 ml
SKU: WM/FAST BOND
Rating: 0.0 (0 reviews)

Product Code :
WM/FAST BOND

In Stock

Description

Technical Data Base: 1 C.-Polyurethane Density: 1,5 g/cm³ Viscosity Adhesive: Pasty Stability/Run-off (ASTM D 222): > 1 mm Processing Temperature: +5 to +40 °C Cure Type: By humidity Curing Condition: +5 to +40°C and 30% to 95% rel. humidity Skin-Overtime*: 3 min. Curing Speed (first 24h): 2-3 min. Volume change (DIN 52451): Increase Gap Filling up to Max: 10 min. Shelf Life (+5°C to +25°C / +41°F to +77°F): 12 months Tensile Strength of Pure Adhesive and Sealant: 10 N/mm² Average Tensile Shear Strength (DIN EN 1465/ ASTM D 12: 11 N/mm² Overpaintable (liquid paint): After complete curing Building Material Category (DIN 412): B2 Temperature Resistance: -30 to +100 °C Surface Pre-Treatment The surfaces must be clean and free of grease. Many surface contaminants, e.g. oil, dust and dirt, can be removed with WEICON Surface Cleaner. For heavily soiled metal surfaces, we recommend WEICON Cleaner Spray S; WEICON Sealant and Adhesive Remover is suitable for removing old paint or adhesive residues. Most materials can be bonded well to themselves and among each other. For certain materials or extreme requirements, we recommend the use of an adhesion agent (primer). Detailed information on this subject is contained in the primer selection table. A mechanical surface pre-treatment, e.g. sanding or sandblasting, can considerably improve the adhesion. Processing Application Application methods: Hand cartridge gun for 310 ml cartridges, compressed air gun (we recommend a variation with piston rod), automatic dosing systems . Curing/Joining the bonded parts: An adhesive surface should permit diffusion. The adhesive reacts with moisture (room humidity/moisture on the adhesive surface). Join the parts within 3 minutes and fix them under pressure until they harden. Adhesive foams easily.

Now:
AED 58.08
Inclusive of VAT

Quantity:

Wishlist

NO RETURN / REFUND

Shipping Details

Location
Standard Delivery:

AED 25.00

Estimated delivery time:

2 days

You can also visit one of our stores to buy this item

Deira Showroom

Sharjah Showroom

Safa Showroom

Overview
Reviews

Highlights

Fast-Bond structural and assembly adhesive is strong, overpaintable, sandable, and resistant to weathering, UV rays, freshwater and salt water. It is free of silicone or solvents Fast-Bond structural and assembly adhesive is strong, overpaintable, sandable, and resistant to weathering, UV rays, freshwater and salt water. It is free of silicone or solvents WEICON Fast-Bond is suitable for the bonding of MDF panels, wood panels, chipboards, fibre and plaster boards, concrete, marble, natural and artificial stone, ceramics, gypsum, metals and rigid foams. This adhesive is suitable for waterproof bonding according to DIN EN 204 D4.

Overall Rating

0.0

Based On 0 ratings